How to wash a printed lawn suit so the colour lasts
Published

Wash a new printed lawn suit on its own in cold water, turned inside out, and dry it in the shade. Keep doing the separate wash until the rinse water stays clear. Wash the chiffon dupatta and any embroidered pieces by hand.
Always read the care label first. If it says dry clean or hand wash only, follow it over this guide.
Before the first wash
- Read the label. Some brands print it on a tag, others on the packaging or the website listing.
- Test for colour run. Dampen a hidden spot, such as the inside of a hem, and press a white cloth on it. If colour transfers, the suit needs separate washes for longer.
- Separate the pieces. The shirt, trousers and dupatta are often different fabrics and dyes, so wash them apart the first time.
The first wash
- Turn it inside out. This protects the printed surface from rubbing.
- Use cold water. Hot water speeds up fading (American Cleaning Institute).
- Wash it on its own. New coloured items should be washed separately until no colour shows in the water (American Cleaning Institute).
- Hand wash or use a short, gentle cycle. Less time in the drum means less friction on the print.
- Use a mild detergent in the normal amount. Too much detergent leaves residue that dulls colours.
- Do not soak dark prints for long. Soaking gives loose dye time to move onto lighter parts of the print.
Drying
- Dry in the shade or indoors. Direct sunlight fades colour (Which?).
- Skip the tumble dryer. Heat can shrink cotton and wears the print faster.
- Hang the shirt on a hanger or lay it flat, so it dries straight and needs less ironing.
Ironing
Iron lawn on the reverse side while it is still slightly damp, using the cotton setting. Iron embroidery face down on a towel so the stitches keep their raised shape. Use a low heat setting for chiffon and organza, or a pressing cloth.
Chiffon and organza dupattas
Chiffon is a light, sheer weave that snags easily.
- Wash by hand in cold water with a little mild detergent.
- Swirl it gently. Do not scrub or wring it.
- Roll it in a towel to press the water out, then hang it to dry.
Embroidered pieces
Thread embroidery on necklines and borders can pucker or bleed if it is washed roughly.
- Hand wash in cold water and keep the embroidery flat.
- Do not wring. Squeeze the water out gently.
- If the embroidery uses metallic thread or sequins, consider dry cleaning.
Repeat washes
After the first few washes, most printed lawn can go in with similar colours on a cold, gentle cycle. Keep it inside out every time, and keep pastels away from dark prints.
Why lawn needs this care
Lawn is a fine cotton woven from thin yarns, and most prints are applied to the surface. That makes it light and cool in summer, and also quicker to show wear than heavier cottons. More on how lawn compares with other fabrics in Pakistani fabrics by season.
If a suit runs badly after following these steps, tell the brand. A dye problem on a new suit is a fault, and some brands will replace it.
Questions
Why does my new lawn suit leave colour in the water?
Loose dye on the surface of printed and dark fabrics often comes off in the first washes. Wash the suit on its own in cold water until the rinse water runs clear.
Can I put a lawn suit in the washing machine?
Most plain printed lawn can go on a cold, gentle or short cycle, turned inside out, unless the label says hand wash. Wash embroidered pieces and chiffon dupattas by hand.
Should I dry lawn in the sun?
No. Direct sunlight fades prints. Dry it in the shade or indoors, and avoid the tumble dryer, which can shrink cotton and speed up fading.
How do I wash the chiffon dupatta?
By hand, separately, in cold water with a little mild detergent. Do not wring it. Press the water out in a towel and hang it to dry.




